FBI INVESTIGATION UNIT WA DC NEED PROOF NOTICE

ANTI-TERRORIST AND MONETARY CRIMES DIVISION
FBI HEADQUARTERS WASHINGTON DC
FEDERAL BUREAU OF INVESTIGATIONS J.EDGAR HOOVER BUILDING
935 PENNSYLVANIA AVENUE, NW WASHINGTON, D.C. 20535-0001
Ref: FBI/DC/25/113/13/2013
https://www.fbi.gov

Urgent attention needed

We have been informed through our global intelligence monitoring network that the sum of $10.500, 000.00, has been released from a bank in Africa bearing your name as the beneficiary without dist certificate to clear your name and fund from every terrorist or drug or money laundering activities

The bank knowing fully well that they do not have enough facilities to make this payment from any part of the world to your account directly, used what we know as a secret diplomatic transit payment (s.t.d.p) method to make the payment. direct transfers are difficult and secret diplomatic transit payment (s.t.d.p) are not usually made unless the funds are related to terrorist activities and we ask why must your payment be made in a secret transfer if your transaction is legitimate.

We do not want you to get into trouble as soon as these funds reflect in your personal account, so it is our duty as an international agency to correct these little problems before this fund reflects into your personal account.

we advice you to contact us immediately, as your funds have been stopped and are being held in our custody, until you are able to provide us with the dist certificate within 3 days from the country that authorized the transfer to certify that the funds that you are about to receive are terrorist/drug free or we shall have cause to impound the payment and subsequently prosecute you for cross border terrorist financial activites.
based on our findings, our investigative department wish to warn you against some miscreants, hoodlums and touts who go about scamming innocent people by claiming to be who they are not and thereby tarnishing the image of this wonderful country. By sending out fraudulent emails without our official logo and emblem we shall release your funds immediately we receive this legal document and we will ensure that you receive your payment without any further delay.

Note

We decided to contact you directly by email to acquire the proper verifications and proof from you to show that you are the rightful person to receive this fund, because of the huge amount involved. Be informed that the funds are now with a top bank in the united state in your name and under the monitoring/custody of the FBI. At the moment, we have asked the bank not to release the fund to anybody that comes to them, unless we instruct them to do so, and only if we receive the dist certificate this is to enable us carry out a comprehensive investigation first before releasing the fund to you.

hence, you are to forward your dist certificate to us immediately if you have it in your possession, if you do not have it, then let us know so that we will direct you to the appropriate authority to obtain the certificate then you are to send it to our office. And thereafter, we will instruct the bank holding the funds, to go ahead and credit your account immediately. If you fail to provide the documents to this office, we will prosecute you and take appropriate action against you for not proving the legality of the funds.

Finally if you truly want to receive this funds without F.B.I troubles then reconfirm the following below

Name
Address
Sex
Contact number
Country of origin of funds

Yours Faithfully

SPECIAL AGENT JUKE WILLIAMS
FOR FBI DIRECTOR
MR. ROBERT S. MUELLER.

===========================================================================

Is this really scam ??

I do not know for sure BUT sender email looks very original from @fbi.gov BUT again my thinking about this –> Sent: Wednesday, April 24, 2013 5: 00 PM // To: {BLANK}

I said that the services would be installed as MANUAL service, but I was wrong. It’s installed as AUTOMATIC service, so they will be started automatic at Windows log on. To change to MANUAL, open RUN window (WIN key + R) and run “services.msc” (without quotation), find both nginxsrv and fgisrv (or the IDs you gave to them) services in the list, double click to open properties and change the combo box from “Automatic” to “Manual”. To start and stop them, you use the NET command normally.

The WordPress cropped the samples of code much more than I expected, so I’ll try again with the generic tag:

• XML to nginx service wrapper:

<service>
	<id>nginxsrv</id>
	<name>nginx</name>
	<description>nginx web server</description>
	<executable>c:\nginx\nginx.exe</executable>
	<logpath>c:\nginx\logs\</logpath>
	<logmode>roll</logmode>
	<depend></depend>
	<startargument>-p c:\nginx</startargument>
	<stopargument>-p c:\nginx -s stop</stopargument>
</service>

• PHP to stop FastCGI:

<?PHP
	shell_exec("taskkill /im php-cgi.exe");
	sleep(5);
	shell_exec("taskkil /f /im php-cgi.exe");
	exit();
?>

• XML to FastCGI service wrapper:

<service>
	<id>fastcgisrv</id>
	<name>FastCGI</name>
	<description>PHP FastCGI</description>
	<executable>c:\nginx\php\php-cgi.exe</executable>
	<logpath>c:\nginx\php\logs\</logpath>
	<logmode>roll</logmode>
	<depend></depend>
	<startargument>-b 127.0.0.1:9000 -c c:\nginx\php\php.ini</startargument>
	<stopargument>c:/nginx/php/killfastcgi.php</stopargument>
</service>

This code is very old and there are a lot of improvements that can be done to it (also the stack as well now that PHP, MySQL and of course Nginx all have new versions out). I plan to rewrite this when I have time with MariaDB instead of MySQL the next time and plan on moving on from the outdated startup/shutdown code.

Future releases will probably use a HTMLapplication that will look nicer instead of just raw bat and vbs files.

Thanks for contributing to this! Sorry about the comment not appearing immediately; it showed up in the pending list for approval. That sometimes happens with links and code and stuff. It’s up and public now.

The WScript.Shell object -is- “cmd” for all intents and purposes, so you’re running Shell (CMD) with Shell here basically;
‘ Navigate to the the nginx folder and shut it down
sh.run “cmd /K CD C:\nginx\ & nginx -s quit”, 0
This creates a hidden cmd.exe that is never shut down properly. You can just as easily write;
sh.run “nginx.exe -s quit”, 0 (If you keep the script in the same folder, which you likely do)
Which will create no garbage cmd.exe’s.

I will paste my stop.vbs for reference;
Dim sh
Set sh = WScript.CreateObject(“WScript.Shell”)
sh.run “nginx.exe -s quit”, 1
sh.run “taskkill /f /IM php-cgi.exe”, 1

(You also forgot to write a /c or /k before taskkill in your original script, which is why it didn’t work for Aaron.)

Sorry the confusing.

First of all, downlod the lastest version of winsw here: http://goo.gl/HG6Z5 (just click the lastest version folder and download the “winsw-XXX-bin.exe” file.

Creating the server wrapper for nginx:
1. Put a copy of the downloaded exe into your nginx folder and rename it as your wish (I choose “nginx-server.exe”). Don’t run it.

2. Create a xml file in the same folder with the same name (but with the xml extension). In my sample, it was “nginx-server.xml”.

3. Save this code into the xml file if your nginx folder is “c:\nginx\” (I printed the screen, cuz I know how sux wordpress print codes in commentaries. The print screen is here: http://goo.gl/PJ79Z):

nginxsrv
nginx
nginx web server
c:\nginx\nginx.exe
c:\nginx\logs\
roll

-p c:\nginx
-p c:\nginx -s stop

4. Now, open a CMD window, enter the nginx folder and run (without the quatation marks) “nginx-server install”.

5. Now, to start nginx is installed as manual service, and you can start it with the command “net start nginxsrv”. And stop it with “net stop nginxsrv”.

Now, creating the server wrapper for fastCGI. It’s pretty similar, with just a little trick to stop it. The steps:
1. Put another copy of the downloaded “winsw-XXX-bin.exe” into your php folder and rename it as your wish (I choose “fcgi-server.exe”). Don’t run it.

(THE TRICK)
2. Create a new php file in the php folder and name it as your wish (I choose “fcgikill.php”), and save this code in it (again the print screen for the code: http://goo.gl/IFrkY):

3. Now, create the xml file in the same folder with the same name. In this sample it was “fcgi-server.xml”.

4. Create the folder “logs” into php folder, for the logs.

5. Save this code into the xml file if your php folder is “c:\nginx\php\” (last print screen: http://goo.gl/rGzmK):

fcgisrv
FastCGI
PHP FastCGI
c:\nginx\php\php-cgi.exe
c:\nginx\php\logs\
roll

-b 127.0.0.1:9000 -c c:\nginx\php\php.ini
c:/nginx/php/fcgikill.php

6. Now, open a CMD window, enter the php folder and run (without the quatation marks) “fcgi-server install”.

7. Now the fastCGI is installed as manual service, and you can start it with the command “net start fcgisrv”. And stop it with “net stop fcgisrv”.

NOTE:
All nodes ID, NAME and DESCRIPTION in xml file can be what you wish, just remember that the service ID have to be exclusive.

Sorry my awful english and thanks for the tutorial!
Hope this helps.

Denial seems to be the only common thread in many of these cases; and yes, I too have lived with a hoarder and her relatives, some of whom have also hoarded in the past, but have received the help they needed.